Greggs Customs » Products

A12 Mopar Engine Display Posts

GCCwpAdmin — Wed, 03 Apr 2024 15:17:00 +0000

CNC Machined support rods for the lift off A12 hoods. These posts are machined from aluminum. The lower part fits over the factory hood pin and is secured with a thumbscrew. The hood attaches to the posts as normal.

As seen on the highest end A12′s out there.

The post A12 Mopar Engine Display Posts appeared first on Greggs Customs.

LED Signals – BMW – S1000rr – 2015+

GCCwpAdmin — Sat, 14 Nov 2015 16:54:34 +0000

The housings are CNC machined from aluminum and are designed to fit specifically into the void left when the stock signals are removed. Made in the USA using quality methods and materials. The LED assembly has 9 Amber LED’s under a .78″ clear injection molded dome. There are 3 wires for running light retention. Stainless hardware and mil spec butt connectors included. No fairing mods necessary. The industry standard in high end turn signals.

The post LED Signals – BMW – S1000rr – 2015+ appeared first on Greggs Customs.

LED Signals – Triumph – Daytona 675 – 2013-2017

GCCwpAdmin — Thu, 05 Nov 2015 16:31:54 +0000

NOTE: Even while we try to design all of our signals to be “bolt-in” without any modification to the fairing, these new 675 signals fit best when the existing holes in the fairing are “opened up” a bit with a file to allow for the best fit.

The post LED Signals – Triumph – Daytona 675 – 2013-2017 appeared first on Greggs Customs.

LED Signals – Yamaha – YZFR1 – 2015 -2017

GCCwpAdmin — Fri, 11 Mar 2016 15:20:16 +0000

The housings are CNC machined from aluminum and are designed to fit specifically into the void left when the stock signals are removed. In this case they will mount in place of the factory mirrors. Made in the USA using quality methods and materials. The LED assembly has 9 Amber LED’s under a .78″ clear injection molded dome. There are 3 wires for running light retention. Stainless hardware and mil spec butt connectors included. The industry standard in high end turn signals.

The post LED Signals – Yamaha – YZFR1 – 2015 -2017 appeared first on Greggs Customs.

License Plate Bracket – Kawasaki Ninja ZX10 04-05 – Fender Eliminator

GCCwpAdmin — Wed, 05 Sep 2018 19:55:18 +0000

This kit consists of 3 machined aluminum pieces.

A license plate bracket, and two base plates that mount in factory fender mount location.

All parts are cnc aluminum with powder-coated finish.

Clear LED Signals included (orange flashing). Hardware included.

The post License Plate Bracket – Kawasaki Ninja ZX10 04-05 – Fender Eliminator appeared first on Greggs Customs.

Nissan GT-R R35 ETS end cap socket

GCCwpAdmin — Sun, 29 Aug 2021 20:07:29 +0000

This is a tool that interfaces with the GT-R’s front wheel drive clutch assembly to be able to to service the FWD clutch pack.

The post Nissan GT-R R35 ETS end cap socket appeared first on Greggs Customs.

Nissan GT-R R35 Machined Titanium Shift Knob 2008-2021

GCCwpAdmin — Tue, 10 Aug 2021 20:13:41 +0000

The only aftermarket shift knob available for the R35 series of Nissan’s GT-R. This knob has a machined titanium top that is polished and can be left or colored with heat according to your request. The base is machined aluminum with a hard black anodize coating. Movement is via Linear bearing with all stainless hardware throughout.

Set your R35 apart from the others.

The post Nissan GT-R R35 Machined Titanium Shift Knob 2008-2021 appeared first on Greggs Customs.

NISSAN GTR R35 Engine Dressup kit

GCCwpAdmin — Thu, 25 Apr 2019 12:36:23 +0000

This set includes

-2 aluminum brackets

-4 aluminum collars

-stainless hardware – 150 [also available with titanium hardware for +$75 ] $225

all pieces are machined aluminum and powder coated for finish.

The post NISSAN GTR R35 Engine Dressup kit appeared first on Greggs Customs.

Nissan GTR R35 Front Carbon Ceramic Rotor adapter kit

GCCwpAdmin — Thu, 25 Apr 2019 14:18:33 +0000

Nissan GTR R35 Front Carbon Ceramic Rotor hat kit

This allows you to adapt 390mm carbon ceramic rotors from current year Corvette and Camaros for braking upgrades to your R35 Nissan GTR.

Save about 12 lbs per side! Huge upgrade to your GTR!

[rear sets are in development]

The post Nissan GTR R35 Front Carbon Ceramic Rotor adapter kit appeared first on Greggs Customs.

Starion / Conquest tubular front crossmember for rack and pinion.

GCCwpAdmin — Sun, 05 Jan 2025 13:56:24 +0000

Tubular front crossmember to allow installation of the Nissan 240sx rack and pinion. Bolt in with factory engine mounting location. CAD designed and CNC machined. Fully Tig welded construction. Powder coat any color included. Can be made for other rack and pinions as well on special request.

Bent tube section in fixture for CNC machining.

Complete assembly with 240sx rack and pinion installed.

240sx top, stock starion middle and tubular on the bottom.

The post Starion / Conquest tubular front crossmember for rack and pinion. appeared first on Greggs Customs.